2011 Kawasaki Mule™ 4010 4x4 Super Black 

Fuel-Injection, 4WD and Power Steering Make It A Standout Performer!

When hills, mud, gravel and other natural obstacles get in the way of a job that just has to get done, four-wheel drive is the key feature in your utility vehicle’s repertoire. And when it comes to 4WD utility vehicles, Kawasaki’s 2011 Mule™ 4010 4x4 is a standout performer. The Mule 4010 4x4 offers a dizzying array of features, including a full-sized chassis, selectable four-wheel drive system, reliable digital fuel injection, electric power steering (EPS) system, fully automatic transmission, locking rear differential, a tilting cargo bed and much more.


General Information

Manufacturer:Kawasaki
Model Year:2011
Model:Mule™ 4010 4x4
Price:*CALL FOR PRICE
Color:Super Black 
Stock Number:K0146 

Dimensions

Length:118.3 in.
Height:75.8 in.
Width:62.0 in.
Weight:1,408 lbs.
Ground Clearance:6.9 in.
Wheelbase:73.6 in.
Turning Radius:11.2 ft.

Engine

Engine:4-stroke, overhead valve V-twin
Displacement:617cc
Bore x stroke:76 x 68mm
Compression ratio:10.3:1
Fuel System:Digital Fuel Injection
Fuel Capacity:6.2 gal.
Ignition:Digital electronic
Cooling:Liquid

Drivetrain

Transmission:Continuously variable transmission (CVT) with high and low range, forward, and reverse, 2WD/4WD
Drive System:Shaft, selectable 4-wheel drive with dual-mode differential

Brakes/Wheels/Tires

Brakes:4-wheel hydraulic drums, sealed
Tires:23x11-10 tubeless

Electrical

Lighting:(2) 30W sealed-beam headlights, (2) 5/21W taillights/stoplight
Instruments:Parking brake warning light, coolant temperature warning light, horn, 12V DC outlet
Battery:12V DC, 18 amp-hour battery, alternator

Operational

Suspension:

Front: Independent, MacPherson strut; 3.9 in. travel

Rear: Semi-independent, DeDion axle with leaf springs and shocks; 2.8 in. trave

Towing Capacity:1,200 lbs.
Cargo Bed Capacity:800 lbs.
Cargo Bed Dimensions:46.3L x 51.6W x 11.3 in. H; 15.6 cu.ft.
Load Capacity:1,330 lbs.
Top Speed:25 mph, governed
Steering:Electric power assisted rack-and-pinion

Other

Roll over protective structure (ROPS)This structure meets ROPS requirements for wheeled tractors under SAE J1194, 7.1.1, 7.1.2 and 7.5.  This structure also meets FMVSS 216 Roof Crush requirement
  

Photos may show optional equipment

*Price, if shown, does not include governmental fees, taxes, dealer vehicle freight/preparation, dealer document preparation charges or any finance charges (if applicable).  Final actual sales price will vary depending on options or accessories selected.